fbpx

Welding Courses

  • The Level 1 Award in Welding is an introductory course that will teach you the skills you need for employment in the welding and fabrication sector. If you have worked or currently work in the industry and are looking to refresh your skills, progress or change employer, this qualification will give you the evidence you need to show you are capable of increasing your job prospects.

    You can choose one of the following units:

    • Manual Metal Arc (MMA) Welding
    • Tungsten Inert Gas (TIG) Welding
    • Metal Inert Gas (MIG)/Metal Active Gas Welding

    All processes delivered on low carbon steel 3 and 6 mm.

    Read more
  • The qualifications at Level 2 are designed for those wishing to build on introductory skills acquired at Level 1 or welding experience. If you have worked or currently work in the industry and are looking to refresh your skills, progress or change employer, this qualification will give you the evidence you need to show you are capable of increasing your job prospects.

    You can choose one of the following units:

    • Manual Metal Arc (MMA) Welding
    • Tungsten Inert Gas (TIG) Welding
    • Metal Inert Gas (MIG)/Metal Active Gas Welding
    • Fluxed Core Arc

    All processes delivered on low carbon steel, stainless steel or aluminum 3 and 6 mm

    Read more
  • The qualifications at Level 3 are designed for those wishing to build on their skills acquired at Level 2 or through competence in the workplace. If you have worked or currently work in the industry and are looking to refresh your skills, progress or change employer, this qualification will give you the evidence you need to show you are capable of increasing your job prospects.

    You can choose one of the following units:

    • Manual Metal Arc (MMA) Welding
    • Tungsten Inert Gas (TIG) Welding
    • Metal Inert Gas (MIG)/Metal Active Gas Welding
    • Fluxed Core Arc

    All processes delivered for sheet, plate or pipe on low carbon steel, stainless steel or aluminum 3, 6 or 10mm (2-10 inch pipe)

    Read more
  • Welding Skills Analysis test at The Welding Academy
    £20.00

    The Welding Academy is fully approved by The Welding Institute to deliver City and Guilds and coding qualifications. All tutors, examiners, and inspectors hold the relevant CSWIP qualifications; Consequently, we can conduct welder qualification testing at our site.

    The development of each candidate is different, so programmes are built to fit each candidate. Therefore to understand your level and to get the best from the training you will undertake a welding skills analysis. The Welding Skills Analysis is a one-hour practical session that takes place in our workshop or at your company.

    The assessment session will quantify your current skill level and allow the instructor to agree with you on the level qualification or the amount of training required for coding. The instructor will take into account your experience, motivation, and the company’s objectives.

    You will complete the initial task unaided and then given advice and training for your last job to assess the speed of improvement from the intervention. At the end of the session, will discuss with you a plan for courses and guidance on your next steps.

    Add to cart
  • Welding Skills Analysis test at The Welding Academy

    The Welding Academy is fully approved by the TWI (The Welding Institute) to deliver City and Guilds and coding qualifications. All tutors, examiners, and inspectors hold the relevant CSWIP qualifications, allowing us to conduct welder qualification testing at our sites.

    Welder training is an individualised built around each candidate. To understand your level and to get the best from the programme you will undertake a welding skills analysis. This is a one-hour practical session which takes place in our workshop.

    The Welding Academy is offering welding and fabrication courses at all levels and disciplines. The programmes will be completed over a number of weekends to fit around your work schedule. The courses will take place on the first weekend of every month starting 02/11/2019. We also will be running level 2 and 3 NVQ in Fabrication and Welding Engineering courses that are delivered flexibly over a 2-24month period. The Welding Academy supports the training of welders and fabricators to recognised occupational standards.

    Read more



Accounts

Free Trial

Projects

SSL

Storage

Domains

Sub-domains

Your Text

WELDING SKILLS ANALYSIS

£20

ONE TIME FEE

Skills Assessment

Training Plan

Choose from MIG/MAG, TIG, MMA or Flux Cored

Sheet, plate or pipe

 (LCS, SS or Al)

Assessment Plan

Certification

Fee refunded on future course booking

 
Info
 
Book

C&G LEVEL ONE

£660

ONE DISCIPLINE

City & Guilds Registration

8 practical and theory sessions

Choose from MIG/MAG, TIG, MMA or Flux Cored

Sheet or plate 

Professional Discussion

Certification

4 Day intensive programme available

 
Book

C&G LEVEL TWO

£940

ONE DISCIPLINE

City & Guilds Registration

10 sessions practical and theory sessions

Choose from MIG/MAG, TIG, MMA or Flux Cored

Sheet or plate (LCS, SS or Al)

Additonal fee for Al & SS

Professional Discussion

Certification

5 Day intensive programme available

 
Book

C&G LEVEL THREE

£1720

ONE DISCIPLINE

City & Guilds Registration

12 practical and theory sessions

Choose from MIG/MAG, TIG, MMA or Flux Cored

Sheet, plate or pipe

 (LCS, SS or Al)

Additional fe Al & SS

Online exam and re-test 

Certification

6 Day intensive programme available

 
Book

WELDING COMPETENCY AND BS 4872 CODING

£250

TRAINING AND CODING

Registration

1 Day Session

Choose from MIG/MAG, TIG, MMA or Flux Cored

Sheet, plate or pipe

 (LCS, SS or Al)

Additional fe Al & SS

Testing

Visual and Destructive Testing

Certification

 
Book

For a free, no obligation chat just give us a call on 0800 246 1483 or email us

Translate »